Code: 13
Description: LCD does not display (operation panel)
Causes: • Powered up? • VCC(+5v) M+4.5V? • Is the level of U16-130(_POR) high (more than +4V)? • Check Main to OPE harness and J3(main). • Is the level of U16-153 (_RST_OUT) high (more than +4V)? • Is the level of U18-31 (_OPE_RST) high (more than +4V)? • Check control signals of U16-124, 125(OPE_TXD, OPE_RXD).
Remedy: • Check power.(SMPS) a Check if the cord is connected. b Check each power channel. (+5V, +11.75V, +30V) • Check power harness. • Check the circuit around U103. • Replace defective parts. • Check the state of data bus of U16.: Replace the main PBA. • Check the circuit around U18. • If signals of OPE_TXD are defective, replace the main PBA. If signals of OPE_RXD is defective, replace OPE PBA.(Refer to circuit explanation.