Code: 0500
Display: FUSER ERROR
Description: Heating roller warm-up failure
- The fusing temperature does not reach the predetermined value after the lapse of the predetermined period of time.
- The heater lamp remains ON for 10 sec. or more in the standby state.
- The fusing temperature is 125 °C or less during a print cycle.
- The fusing temperature is 220 °C or more. • An open-circuited thermistor is detected.
- The fusing temperature does not reach the predetermined value after the lapse of the predetermined period of time.
- The heater lamp remains ON for 10 sec. or more in the standby state.
- The fusing temperature is 125 °C or less during a print cycle.
- The fusing temperature is 220 °C or more. • An open-circuited thermistor is detected.
Causes: Fuser unit DC power supply (DCPU) Print control board (PRCB)