Description: Polygon motor malfunction - The interval of the /BD signal is retarded relative to the predetermined value after the polygon motor has started rotating. - The interval of the /BD signal is retarded relative to the predetermined value after it has reached the predetermined value. - The laser beam output does not reach the predetermined value.
Description: Heating roller warm-up failure - The fusing temperature does not reach the predetermined value after the lapse of the predetermined period of time. - The heater lamp remains ON for 10 sec. or more in the standby state. - The fusing temperature is 125 °C or less during a print cycle. - The fusing temperature is 220 °C or more. • An open-circuited thermistor is detected.
Causes: Fuser unit DC power supply (DCPU) Print control board (PRCB)