Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC29-01 — Konica-Minolta bizhub 920 pro

Code: SC29-01

Description: The dirt correction of the sensor is not completed. While in the maximum density correction, the dirt correction of the IDC sensor (IDCS) is not sufficient. When this condition is detected 10 times in succession, the error code is displayed.
Causes: Toner control sensor board (TCSB) Printer control board (PRCB) High voltage unit /2 (HV2) Transfer/separation charger Power feeding contact ADU drive board (ADUDB) Wiring harness broken

← Xem tất cả mã lỗi Konica-Minolta bizhub 920 pro

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie