Description: An abnormal speed signal of the paper feed motor (M4) is checked. An error detection signal is detected twice in succession a specified period of time after M4 was turned ON (the first signal is ignored).
Causes: Paper feed motor (M4) Printer control board (PRCB)
Description: An abnormal speed signal of the paper feed motor (M101) is checked. An error detection signal is detected twice in succession a specified period of time after M101 was turned ON (the first signal is ignored).
Causes: Paper feed motor (M101) LU drive board (LUDB)
Description: The locking of the paper lift motor /1 (M19) is detected. An error detection signal of M19 is detected while M19 is ON.
Causes: Paper lift motor /1 (M19) Printer control board (PRCB) Upper limit sensor /1 (PS20) DC power supply /2 (DCPS2) Loose connection Tray rear end restriction plate misaligned Paper improperly loaded Tray 1
Description: When the upper limit sensor /1 (PS20) is OFF, PS20 does not turn ON within a specified period of time after the paper lift motor / 1 (M19) turns ON for lifting operation. And at this time, an error detection signal (24V cut off) is detected.
Causes: Paper lift motor /1 (M19) Printer control board (PRCB) Upper limit sensor /1 (PS20) DC power supply /2 (DCPS2) Loose connection Tray rear end restriction plate misaligned Paper improperly loaded Tray 1
Description: When the upper limit sensor /1 (PS20) is OFF, PS20 does not turn ON within a specified period of time after the paper lift motor / 1 (M19) turns ON for lifting operation. And at this time, an error detection signal (blowout of ICP) is detected.
Causes: Paper lift motor /1 (M19) Printer control board (PRCB) Upper limit sensor /1 (PS20) DC power supply /2 (DCPS2) Loose connection Tray rear end restriction plate misaligned Paper improperly loaded Tray 1
Description: When the upper limit sensor /1 (PS20) is OFF, PS20 does not turn ON within a specified period of time after the paper lift motor / 1 (M19) turns ON for lifting operation. And at this time, an error detection signal is not detected.
Causes: Paper lift motor /1 (M19) Printer control board (PRCB) Upper limit sensor /1 (PS20) DC power supply /2 (DCPS2) Loose connection Tray rear end restriction plate misaligned Paper improperly loaded Tray 1
Description: The locking of the paper lift motor /2 (M20) is detected. When M20 is ON, an error detection signal of the M20 is detected.
Causes: Paper lift motor /2 (M20) Printer control board (PRCB) Upper limit sensor /2 (PS21) DC power supply /2 (DCPS2) Loose connection Tray rear end restriction plate misaligned Paper improperly loaded Tray 2
Description: When the upper limit sensor /2 (PS21) is OFF, PS21 does not turn ON within a specified period of time after the paper lift motor / 2 (M20) turns ON for lifting operation. And at this time, an error detection signal (24V cut off) is detected.
Causes: Paper lift motor /2 (M20) Printer control board (PRCB) Upper limit sensor /2 (PS21) DC power supply /2 (DCPS2) Loose connection Tray rear end restriction plate misaligned Paper improperly loaded Tray 2
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.