Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC93-06 — Konica-Minolta bizhub 920 pro

Code: SC93-06

Description: At the start of operation, an error detection signal (solenoid/blowout of clutch ICP) is detected. However, an error detection signal (24V cut off) is not detected.
Causes: Each of the solenoids Each of the clutches DC power supply /2 (DCPS2) Loose connection Wiring harness earth fault ADU drive board (ADUDB)

← Xem tất cả mã lỗi Konica-Minolta bizhub 920 pro

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie