Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0204 — Konica-Minolta bizhub C227

Code: C0204

Description: Tray 2 feeder up/down abnormality. The tray 2 upper limit sensor (PS22) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Causes: • Tray 2 lift-up motor (M13) • Tray 2 upper limit sensor (PS22) • MFP board (MFPB)
Remedy: 1. Remove the tray and check to see if a piece of paper is not left inside the machine. 2. Check the connector between M13-MFPB CN7E for proper connection and correct as necessary. 3. Check the connector of M13 for proper drive coupling and correct as necessary. 4. Check the connector between PS22-relay CN55-MFPB CN5E for proper connection and correct as necessary. 5. PS22 I/O check, sensor check • Control signal: MFPB CN5E<B>-9 (ON) • Location of electrical component: 11-C 6. M13 operation check • Control signal: MFPB CN7E<A>-13 to 14 • Location of electrical component: 23-C 7. Replace M13. 8. MFPB F13E conduction check 9. Replace MFPB. NOTICE • Link to the wiring diagram (N.1. bizhub C287/C227) • Link to the layout drawings for related parts by each trouble code (S.7. C0204)

← Xem tất cả mã lỗi Konica-Minolta bizhub C227

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie