Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0206 — Konica-Minolta bizhub C227

Code: C0206

Description: Tray 3 lift-up failure (When PC-114 or PC-214 is installed) The tray 3 upper limit sensor (PS116) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Causes: • Tray 3 lift-up motor (M113) • Tray 3 upper limit sensor (PS116) • PC control board (PCCB) • MFP board (MFPB)
Remedy: 1. Remove the tray and check to see if a piece of paper is not left inside the machine. 2. Check the connector between M113-PCCB CN6C for proper connection and correct as necessary. 3. Check the connector of M113 for proper drive coupling and correct as necessary. 4. Check the connector between PS116-relay CN24-PCCB CN4 for proper connection and correct as necessary. 5. PS116 I/O check, sensor check • Control signal: PCCB CN4-3 (ON) • Location of electrical component: PC-114/PC-214 7-C 6. M113 operation check • Control signal: PCCB CN6C-8 to 9 • Location of electrical component: PC-114/PC-214 2-C 7. Replace M113. 8. Replace PCCB. 9. MFPB F11E conduction check 10. Replace MFPB. NOTICE • Link to the wiring diagram (N.2.2 PC-114) • Link to the wiring diagram (N.2.3 PC-214) • Link to the layout drawings for related parts by each trouble code (S.8. C0206)

← Xem tất cả mã lỗi Konica-Minolta bizhub C227

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie