Description: Nonvolatile data save error (EEPROM) The EEPROM is replaced with a new one.
Causes: • EEPROM/1 • EEPROM/2
Remedy: 1. Replace the following components with new ones. When the transfer belt unit and the fusing unit have been replaced with new ones, perform [New Release] in the service mode. When the transfer roller has been replaced with a new one, perform [Counter clear]. • Imaging unit/Y,M,C • Developing unit/K • Drum unit/K • Toner cartridge/Y,M,C,K • Transfer belt unit • Fusing unit • Transfer roller • Feed roller, pick-up roller, separation roller (including options) 2. Turn OFF the main power switch, disconnect and then connect the power cord. Wait for 10 sec. or more after connect the power cord, and turn ON the main power switch. 3. Set the various setting values in the service mode again. NOTICE • Link to the layout drawings for related parts by each trouble code (S.85. CD392)