Description: Tray 2 Elevator failure
• The Lift-Up Sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
Remedy: 1 Check the M3-PC connector for proper connection and correct as necessary. 2 Check the connector of M3-PC for proper drive coupling and correct as necessary. 3 PC7-PC I/O check, Sensor check PWB-Z-PC PJ6Z PC-3 (ON) S-24. 4 M3-PC operation check PWB-Z-PC PJ4Z PC-4 to 5 M-27. 5 Change PWB-Z-PC