• Code: C0001
• Description: LCT Connection failed
• Remedy: 1 Check the Vendor connector for proper connection and correct as necessary. 2 Check the PWB-M connector for proper connection and correct as necessary. 3 Change PWB-M

• Code: C0102
• Description: LCT Vertical Transport Motor malfunction
• Remedy:

• Code: C0204
• Description: Tray 2 Elevator failure
  • The Lift-Up Sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
• Remedy: 1 Check the M3-PC connector for proper connection and correct as necessary. 2 Check the connector of M3-PC for proper drive coupling and correct as necessary. 3 PC7-PC I/O check, Sensor check PWB-Z-PC PJ6Z PC-3 (ON) S-24. 4 M3-PC operation check PWB-Z-PC PJ4Z PC-4 to 5 M-27. 5 Change PWB-Z-PC

• Code: C0206
• Description: Tray 3 Elevator failure
• Remedy:

• Code: C0208
• Description: Tray 4 Elevator failure
• Remedy:

• Code: C0209
• Description: LCT Elevator Motor malfunction (Elevator malfunction)
• Remedy:

• Code: C0210
• Description: LCT ascent motion failure
• Remedy:

• Code: C0211
• Description: Manual Tray Rise Descent Error
  • The Bypass Lift-Up Sensor is not blocked even when the Tray 2 Vertical Transport Motor has turned for a given number of pulses after the sequence to move the Paper Lifting Plate from the standby position to the feed position was started. • The Bypass Lift-Up Sensor is not unblocked even when the Tray 2 Vertical Transport Motor has turned for a given number of pulses after the sequence to move the Paper Lifting Plate from the feed position to the standby position was started.
• Remedy: 1 Check the M2-PC connector for proper connection and correct as necessary. 2 Check the connector of M2-PC for proper drive coupling and correct as necessary. 3 PC14 I/O check, Sensor check PWB-M CNTRY1-10 (ON) C-8 to 9. 4 M2-PC operation check PWB-Z-PC PJ5Z PC-5 to 8 M-25. 5 Change PWB-Z-PC.