Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C6103 — Konica-Minolta bizhub C300

Code: C6103

Description: Slider over run
• The scanner home sensor detects the scanner at its home position during a period of time that begins with the time when a prescan command and a scan preparation command are executed and ends when a home return command is executed.
Remedy: 1 Correct or change the scanner drive (cable, pulley, gear, belt) if it is faulty. 2 Correct the scanner motor set screw if loose. 3 Adjust [Image Position Leading Edge] and [Feed Direction Adjustment]. 4 Check the PC201, M201, SCADB and IPB connector for proper connection and correct as necessary. 5 PC201 I/O check, sensor check IPB PJ11IPB-8 (ON) T-13 6 M201 operation check SCADB PJ3SCADB-1 (REM) SCADB PJ3SCADB-3 (LOCK) Y-7. 7 Change SCADB. 8 Change IPB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie