Code: 2650
Description: Main backup media access error
• When an error is detected at the data reading process. • The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value.
• When an error is detected at the data reading process. • The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value.
Causes: • MFP board (MFPB) • Printer control board (PRCB)
Remedy: 1 Check the harness from MFPB to PRCB for proper connection and correct as necessary. - - 2 Replace MFPB - - 3 Replace PRCB - - 1. Check that the trouble code “4802” appears and then display service mode. 2. Touch [Engine Data Backup]. 3. Touch [Engine Data Backup]. 4. Touch [Engine Data Reflect Mode], and touch [OK]. 5. Check that the result “OK” appears. 6. Turn OFF the main power switch and turn it ON again more than 10 seconds after. 7. Update the PRCB firmware. 8. Make the specified readjustments. 4 If the above actions do not solve the problem, contact KM.