Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E-07 — KIP 5000

Code: E-07

Description: Cutter Error
Causes: 1. In case one of the Cutter Home Position Signal 1 or 2 stays H and the other does not show L when the Cutter Motor is not rotating. 2. It takes longer than 1.5 seconds to move the Cutter from one home position to the another one. 3. After the Cutter worked, when Flapper Detective Signal does not change from L to H, and L again.

← Xem tất cả mã lỗi KIP 5000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie