Code: 200.x2, 200.x3
Description: 200.12 Paper fed from tray 1 was detected earlier than expected at the sensor (input). 200.13 Paper fed from tray 1 never arrived at the sensor (input). 200.22 Paper fed from tray 2 was detected earlier than expected at the sensor (input). 200.23 Paper fed from tray 2 did not reach the sensor (input). 200.32 Paper fed from tray 3 was detected earlier than expected at the sensor (input). 200.33 Paper fed from tray 3 did not reach the sensor (input). 200.42 Paper fed from tray 4 was detected earlier than expected at the sensor (input). 200.43 Paper fed from tray 4 did not reach the sensor (input).
Remedy: Step 1 a From the home screen, touch Settings > Device > Preferences. b Check if the paper type and size settings match the paper type and size set on the tray. Does the paper size match the size set on the tray? Go to step 3. Go to step 2. Step 2 Change the paper size or adjust the size setting in the tray. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the paper path for paper jams and fragments. Is the paper path free of jams and fragments? Go to step 5. Go to step 4. Step 4 Remove the jams and fragments. Does the problem remain? Go to step 5. The problem is solved. Step 5 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Sensor tests b Find the sensor (Input). Does the sensor status change while toggling the sensor? Go to step 8. Go to step 6. Step 6 Check the sensor cable for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 7. The problem is solved. Step 7 Check the sensor for damage, and replace if necessary. Does the problem remain? Go to step 8. The problem is solved. Step 8 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Motor tests > Deskew b Touch Start. Does the motor run? Contact the next level of support. Go to step 9. Step 9 Check the motor cable for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 10. The problem is solved. Step 10 Replace the motor (registration). Does the problem remain? Contact the next level of support. The problem is solved.