Code: 230.x5
Description: 230.15 Paper fed from tray 1 never cleared the sensor (duplex path 1). 230.25 Paper fed from tray 2 never cleared the sensor (duplex path 1). 230.35 Paper fed from tray 3 never cleared the sensor (duplex path 1). 230.45 Paper fed from tray 4 never cleared the sensor (duplex path 1).
Remedy: Step 1 a From the home screen, touch Settings > Device > Preferences. b Check if the paper size matches the size set on the tray guides. Does the paper size match the size set on the tray? Go to step 3. Go to step 2. Step 2 Change the paper size or adjust the size setting in the tray. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check if the paper size matches the size set on the tray guides. Does the paper size match the size set on the tray? Go to step 5. Go to step 4. Step 4 Change the paper size or adjust the size setting in the tray. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the paper path for paper jams and obstructions. Is the paper path free of jams and obstructions? Go to step 7. Go to step 6. Step 6 Remove the jams and obstructions. Does the problem remain? Go to step 7. The problem is solved. Step 7 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Sensor tests b Find the sensor (Duplex path 1). Does the sensor status change while toggling the sensor? Go to step 10. Go to step 8. Step 8 Check the sensor cable for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 9. The problem is solved. Step 9 Check the sensor for damage, and replace if necessary. Does the problem remain? Go to step 10. The problem is solved. Step 10 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Motor tests > Duplex/MPF b Select a setting, and then touch Start. Does the motor run? Contact the next level of support. Go to step 11. Step 11 Check the motor cable for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 12. The problem is solved. Step 12 a Replace the motor. See “Motor (duplex/MPF) removal”. b Perform a print job. Does the problem remain? Contact the next level of support. The problem is solved.