Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 241.16 — Lexmark C4150

Code: 241.16

Description: Paper fed from tray 1 was never detected by the sensor (tray 1 pick).
Remedy: Step 1 a From the home screen, touch Settings > Device > Preferences. b Check if the paper size matches the size set on the tray guides. Does the paper size match the size set on the tray? Go to step 3. Go to step 2. Step 2 Change the paper size or adjust the size setting in the tray. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the tray for overfilling. Is the tray overfilled? Go to step 4. Go to step 5. Step 4 Remove the excess paper from the tray. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the paper condition in tray 1. Is the paper crumpled or damaged? Go to step 6. Go to step 7. Step 6 Replace the crumpled or damaged paper. Does the problem remain? Go to step 7. The problem is solved. Step 7 Check the condition of the pick rollers. Are the pick rollers free from excess wear, contamination, and damage? Go to step 9. Go to step 8. Step 8 Replace the pick rollers. Does the problem remain? Go to step 9. The problem is solved. Step 9 a Check the pick rollers for proper installation. b Firmly press the pick roller assembly upward to make sure that it is properly engaged to the shaft. Is the pick roller assembly properly installed? Go to step 11. Go to step 10. Step 10 Reinstall the pick roller assembly. Does the problem remain? Go to step 11. The problem is solved. Step 11 Check the paper path exiting the paper tray. Is the paper path free of fragments and contamination? Go to step 13. Go to step 12. Step 12 Clean the paper path. Does the problem remain? Go to step 13. The problem is solved. Step 13 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Sensor tests b Find the sensor (Input). Does the sensor status change while toggling the sensor? Go to step 16. Go to step 14. Step 14 Check the sensor cable for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 15. The problem is solved. Step 15 Check the sensor for damage, and replace if necessary. See “Sensor (input) removal”. Does the problem remain? Go to step 16. The problem is solved. Step 16 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Motor tests > Pick (tray 1) b Select a setting, and then touch Start. Does the motor run? Go to step 19. Go to step 17. Step 17 Check the motor cable for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 18. The problem is solved. Step 18 a Replace the motor (tray 1 pick). b Perform a print job. Does the problem remain? Go to step 19. The problem is solved. Step 19 a Replace the media feeder. See “Media feeder removal”. b Perform a print job. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark C4150

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie