Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C4E2 — Toshiba e-Studio 6570C

Code: C4E2

Description: Fuser belt rotation detection sensor abnormality
- The fuser belt does not rotate or incorrectly rotates.
Causes: Fuser belt rotation detection sensor Detection plate (rotor) Dirty/damaged Fuser roller Deformed/damaged Heat pipe roller bearing Locked (Rotation failure) Bushing Worn Drive plate Bend section broken Gear Teeth damaged, worn LGC board
Remedy: Fuser unit • Fuser belt rotation detection sensor check (Input check: 03-[FAX]ON/[4]/[F]) • Connector check in the fuser belt rotation sensor • Harness check in the fuser belt rotation sensor • Detection plate (rotor) check • Grease check in the gear (shaft / tooth flank) • Fuser roller check • Check that the C-ring in the pressure roller does not come off. • Check that the bearing in the heat pipe roller rotates properly. • Fuser unit installation check (Check that the screws fixing the fuser unit are not loose.) Fuser drive unit • Bushing check • Check that the drive unit is correctly installed (2 dowels). • Check that the drive metal plate is not broken. • Check that the gear is not damaged or worn. • One-way clutch check • Grease check in the gear (shaft / tooth flank) LGC board • Connector check (CN306) • Board check

← Xem tất cả mã lỗi Toshiba e-Studio 6570C

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie