Code: CFA0
Description: Media sensor output abnormality before paper reaching: The sensor output value before paper is reached to the media sensor is not normal.
Causes: Media sensor (S69)
Remedy: 1 If these codes are recorded in the error history, the media sensor may have a malfunction. In this case check the following: 2 Is the connector of the media sensor disconnected or is any harness open circuited? 3 Are the arm of the media sensor and the bearing rollers operating properly? 4 Is the media sensor adjusted correctly? 6.7.1Adjustment of the media sensor position 5 If any abnormality was found in step 3 above or no abnormality was found in steps 2 and 4, replace the media sensor. Note that printing is available even if the media sensor is in a faulty condition. The functions that the media sensor usually performs are then carried out as follows: If the media type of paper is set as plain paper, a media type (plain paper 1 or 2) set in advance in the code below will be used. 08-4599 0: Plain paper 1 1: Plain paper 2 (Factory default - JPD: 0, overseas: 1) Media type setting checking function will be disabled. Even if the media sensor is in a faulty condition, any message notifying this will not be appear. Check the condition with the error history.