Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA50 — Toshiba e-Studio 6570C

Code: EA50

Description: Stapling jam: Stapling is not performed properly. [MJ-1103/1104]
Causes: Stapler interference sensor (S11) Finisher controller board
Remedy: Finisher • Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. • Is the jam cleared by taking off the staple cartridge from the finisher and removing the staple sheet slid from the staple case? Stapler interference sensor (S11) • Sensor check • Connector check • Harness check Finisher controller board • Connector check(CN2) • Board check

← Xem tất cả mã lỗi Toshiba e-Studio 6570C

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie