Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C41 — Toshiba e-Studio 80

Code: C41

Description: Thermistor abnormal or heater disconnection at power ON
Remedy: Note) Before carrying out checks (1) and (2) below, first disconnect the power cord to prevent the danger of electric shock. (1) Check the thermistor. • Are the connectors disconnected? • Are the main and sub (end section) thermistors firmly contacting the heat roller? • Are the harness of the main and sub (end section) thermistors broken? (2) Check the heater lamp and SSR. • Is the heater lamp broken? • Is the heater lamp connector disconnected? • Is the thermostat blown? • Is the SSR connector disconnected? • Are the SSR and switching power supplies damaged? (3) Check the LGC board. • Is connector J326 disconnected? • Check the circuits for breaks, short-circuits or other troubles. • Replace the LGC board. (4) Reset the status counter. Carry out the following after you have repaired the location where error [C41] occurred: • Turn the power ON while holding the 0 and 8 keys down. • Enter “400” from the number key pad, and press the START key. • Overwrite currently displayed status counter 1 or 2 to 0, and press the SET or INTERRUPT key to cancel error [C41]. • Turn the power OFF then back ON, and check the machine enters a normal standby state.

← Xem tất cả mã lỗi Toshiba e-Studio 80

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie