Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CC2 — Toshiba e-Studio 80

Code: CC2

Description: Communications error between finisher saddle
Remedy: Does turning the power switch on the main unit OFF and then ON again rectify the trouble? No END Yes Is the wiring between the finisher controller board and the saddle stitcher board normal? No Correct. Yes Measure the voltage access between J3-2 (+) on the finisher controller board and J3-1 (-). Is it DC 24V? No Replace the finisher controller board. Yes Replace the saddle stitcher controller board.

← Xem tất cả mã lỗi Toshiba e-Studio 80

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie