Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 686-01 S99 — Riso HC5500

Code: 686-01 S99

Description: Finisher communication error 1 (HC Finisher & HC Auto Stacker)
HC Finisher
•Communication error occurred between the HC Control PCB and Finisher.
•Problem occurred in the command sequence. (command sequence error)
HC Auto Stacker
•Break signal received and initial communication cannot be made when the power is turned ON.
•Command was not received in correct sequence timing.
•No reply from HC Auto Stacker within 200ms after its power is turned ON.
•The firmware version number is not replied back within 200 ms.
•Ready reply is not replied back from HC Auto Stacker within 400ms after power is turned ON.
•Energy saving mode is not replied back from HC Auto Stacker within 500ms from power ON.
•No reply from HC Auto Stacker against the command given.
•Command sequence error.
•Large amount of data is received at one time (buffer full in data receiving).
•Large amount of data is sent at one time (buffer full in data sending).

← Xem tất cả mã lỗi Riso HC5500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie