Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 05-900 — Xerox Phaser 3635 MFP

Code: 05-900

Description: DADF Jam 0
Causes: The lead edge of the document failed to actuate the registration sensor within the correct time.
Remedy: 1. Open the DADF door assembly . Remove all jammed paper. 2. Check the document path for damage or obstructions. 3. Check the pickup roll assembly . If necessary, install a new pickup roll assembly . 4. Check the retard pad assembly . If necessary, install a new retard pad assembly . 5. Check that the registration sensor actuator moves freely and is not damaged. 6. Enter dC330 code 05-130. Check the registration sensor (Q05-130) . 7. Check the wiring between the registration sensor and CN1 on the DADF PWB. If necessary, install a new registration sensor . 8. Enter dC330 code 05-201. Check that the DADF scan motor (MOT05-200) runs. 9. Check the wiring between the DADF scan motor and CN9 on the DADF PWB. If necessary, install a new DADF scan motor . 10. While the DADF scan motor runs, stack the code 05-300 to energize the pick up solenoid (SOL05-300). Check that the pickup roll rotates. 11. Check the wiring between the pick up solenoid and CN7 on the DADF PWB. If necessary, install a new pick up solenoid . 12. If necessary, install new components: • DADF PWB . • DADF drive assembly . • Document transport assembly .

← Xem tất cả mã lỗi Xerox Phaser 3635 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie