Causes: The machine has detected that tray 2 is empty.
Remedy: 1. Pull out tray 2. Check that the paper empty actuator moves freely and is not damaged. 2. Enter dC330 code 07-230. Check the tray 2 paper empty sensor (S07-230) . 3. Check the wiring between the paper empty sensor and CN1 on the Tray 2 PWB. If necessary, install a new paper empty sensor . 4. Check the wiring between CN7 on the Tray PWB and CN33 and CN34 on the Main PWB. 5. If necessary: a. Install a new tray 2 PWB . b. Perform OF7 Main PWB Check RAP.