Code: 07-231
Description: Check the Tray Feed Area
Causes: The machine has detected that paper is jammed in the tray 2 paper feeding area at power on.
Remedy: 1. Pull out tray 2. Remove all jammed paper. 2. Remove the pickup roll assembly . Check that the pickup roll is clean. If necessary, install a new pickup roll assembly . 3. Enter dC330 code 08-920 to run the tray 2 feed motor. 4. Check the wiring between the tray 2 feed motor and CN8 on the Tray 2 PWB. 5. While the tray 2 feed motor runs, stack the code 08-820 to energize the tray 2 pickup clutch (CL08-820). Check that the tray 2 pickup roll assembly and feed roll rotate. Install new components as necessary . 6. Check the wiring between the tray 2 pickup clutch and CN11 on the Tray 2 PWB. 7. If necessary, install new components: • Tray 2 feed motor . • Tray 2 PWB . • Tray 2 assembly .