Code: 17-100 ... 17-610
Description: Network Controller Faults
Causes: These are the faults displayed when the machine encounters network controller problems. The faults are listed in code order, together with any recommended actions. Please note that the service actions are limited.
Remedy: NOTE: The network connection has two LEDs positioned next to the network port. The upper LED on indicates that the PWB is ready. The lower LED flashing indicates that the network is good. 17-100 IP Address is Conflicted The IP address of the machine is being used by another device. Go to GP 4 System Administration Tools. Check with the customer that the connectivity and network setup settings are correct. 17-110 Connection Error The machine encountered an error when establishing a connection to the designated server. Check with the customer that the connectivity and network setup settings are correct. Refer to GP 4 System Administration Tools. 17-120 Server Not Found The machine can not find the designated server. Check with the customer that the connectivity and network setup settings are correct. Refer to GP 4 System Administration Tools. 17-130 Login Error The machine can not login to the designated server. Check with the customer that the connectivity and network setup settings are correct. Refer to GP 4 System Administration Tools. 17-140 Access Denied A permissions error occurred. Check with the customer that the connectivity and network setup settings are correct. Refer to GP 4 System Administration Tools. 17-150 Lock Exists The *.lck directory already exists. 17-200 Network Cable is Disconnected The network cable is not connected. Check the network cable. 17-400 User Cancelled The user cancelled the network scan job. 17-500 Document Jam Occurred A document jam occurred during the scan operation. 17-510 Operation Error An error occurred when sending the image file. 17-600 Filename is Too Long The name of the file to be sent is longer than the destination systems limits. Shorten the file name. 17-610 Scan File Exists The file name already exists on the destination server. Change the file name.