Code: 20A
Description: Fax Faults Without a Code
Causes: Use this RAP when the machine has a fax fault but does not display a code. If a fax fault code is displayed, go to the 20-100 to 20-900 Fax Faults RAP.
Remedy: 1. Ensure the telephone line cable is properly connected into the line connector on the Fax PWB module . 2. Ensure the correct dialing mode is selected. Refer to GP 4 System Administration Tools. 3. Use a known good telephone handset or a line test tool to check the telephone line. 4. If sent faxes are blank or light, make sure that the scanner lock is completely unlocked. 5. If necessary install a new fax PWB . 6. Perform OF7 Main PWB Check RAP.