Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi H7-3, H7-4 — Xerox Phaser 5550

Code: H7-3, H7-4

Description: Tray 4-5 Control Board Failure - NVM A read/write error has occurred in the NVRAM located on the Tray 4-5 PWB. • Tray 4-5 Control Board Failure - H7-3 NVM Out-of-order • Tray 4-5 Control Board Failure - H7-4 NVM R/W Error
Causes: • Tray 4-5 PWB • Engine Control Board
Remedy: 1 Cycle the printer power. Does the error reoccur? Go to Step 3. Problem solved. 2 Check the Tray 4-5 PWB connection. Are P/J413 and P/J541 connected? Go to Step 3. Connect P/J413 and P/541. 3 Check continuity between the Tray 4-5 PWB and the Engine Control Board. 1. Disconnect P/J413 and P/J541. 2. Check for continuity at the following: • P/J413-A1 <=> P/J541-1 • P/J413-A2<=> P/J541-2 • P/J413-A3 <=> P/J541-3 • P/J413-A4 <=> P/J541-4 • P/J413-A5 <=> P/J541-5 • P/J413-A6 <=> P/J541-6 • P/J413-B1 <=> P/J541-7 • P/J413-B2 <=> P/J541-8 • P/J413-B3 <=> P/J541-9 • P/J413-B4 <=> P/J541-10 • P/J413-B5 <=> P/J541-11 • P/J413-B6 <=> P/J541-12 Are these conductive? Go to Step 4. Repair the wiring. 4 Check for +5 V to the Tray 4-5 PWB. Is there +5 V across P/J413-A5 (+) <=> ground? Replace the Tray 4-5 PWB. Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 5550

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie