Code: U0-1, U1-1
Description: Main Motor Failure The Main Motor stopped or did not start on time.
Causes: • Motor Assembly • Engine Control Board
Remedy: 1 Check the Motor Assembly installation. Remove the Upper Rear Cover . Is the Motor Assembly installed correctly? Go to Step 2. Correct the installation. 2 Test Motor Assembly operation.Run the Service Diagnostics Main Motor test. Does the motor run? Go to Step 6. Go to Step 3. 3 Check the Motor Assembly connection. Are P/J214 and P/J408 connected? Go to Step 4. Connect P/J214 and P/J408. 4 Check continuity between the Motor Assembly and Engine Control Board. Does each wire conduct between P/J214 <=> P/J408? Go to Step 5. Repair the wiring. 5 Check for +24 V to the Motor Assembly. Is there +24 V across P/J214-1/-2 (+) <=> ground? Replace the Motor Assembly. Replace the Engine Control Board.