Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U3-3 — Xerox Phaser 5550

Code: U3-3

Description: Laser Unit Failure - U3-3 Laser Power The Laser Assembly has failed.
Causes: • Drum Cartridge • Laser Assembly • Engine Control Board
Remedy: 1 Check the Drum Cartridge installation. Is the Drum Cartridge installed properly? Go to Step 2. Correct the installation. 2 Check the Laser Assembly installation. Is the Laser Assembly installed properly? Go to Step 3. Correct the Laser Assembly. 3 Check the Laser Assembly connection. Are P/J140 and P/J406 connected? Go to Step 4. Connect the Laser. 4 Check the Laser Assembly connections. Are P/J130, P/J620 and P/J406 connected? Go to Step 5. Connect P/J130, P/J620 and P/ J406. 5 Check continuity between the Laser Assembly and the Engine Control Board. Is there continuity on each wire between P/ J140 <=> P/J406? Go to Step 6. Repair the wiring. 6 Check continuity between the Laser Assembly and the Engine Control Board. Is there continuity on each wire between P/ J130 <=> P/J406? Go to Step 7. Repair the wiring. 7 Check for +5 V to the Laser Assembly. Is there +5 V across P/J140-8 (+) <=> ground? Go to Step 8. Replace the Engine Control Board. 8 Check for +24 V to the Laser. Is there +24 V across P/J130-5 (+) <=> ground? Replace the Laser Assembly REP 5.10). Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 5550

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie