Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U5-1 — Xerox Phaser 5550

Code: U5-1

Description: Toner Motor Failure - U5-1 Motor Rotation The Toner Dispense Motor failed to rotate.
Causes: • Toner Cartridge • Toner Dispense Assembly • Toner Dispense Motor • Engine Control Board
Remedy: 1 Check the Toner Cartridge installation. Reinstall the Toner Cartridge. Does it operate properly? Problem solved. Go to Step 2. 2 Check Toner Dispense Assembly rotation. Does the gear located at the lower part of the Toner Dispense Assembly rotate? Go to Step 3. Restore proper operation. 3 Check Toner Dispense Assembly clogging. Is the pipe located at the lower part of the Toner Dispense Assembly clogged? Go to Step 4. Clean the pipe. 4 Test Dispense Motor operation. Run the Service Diagnostics Dispense Motor test. Does the motor operate? Replace the Engine Control Board (page 8-89). Go to Step 5. 5 Check the Dispense Motor for connection. Are P/J216 and P/J420 connected? Go to Step 6. Connect P/J216 and P/J420. 6 Check continuity between the Dispense Motor and Engine Control Board. Is there continuity on each wire between P/ J216 <=> P/J420? Go to Step 7. Repair the wiring. 7 Check for +24 V at the Dispense Motor. Is there +24 V across P/J216-1 (+) <=> ground? Replace the Dispense Motor. Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 5550

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie