Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 010-397 — Xerox Phaser 6140

Code: 010-397

Description: Fuser Error 010-397 The Fuser has failed.
Causes: • Fuser, PL6.1.1 • Fuser Harness, PL6.1.2 • LVPS, PL8.2.1 • MCU Board, PL8.2.13 • LVPS2 Harness, PL9.1.3
Remedy: 1 Reseat the Fuser and cycle system power. Does the error persist? Go to step 2. Complete 2 Check these connections • MCU Board P/J17 and Fuser P/J171. • Fuser P/J171 and LVPS P/J47. • LVPS P/J501 and P/J502 and MCU Board P/J14 and P/J15 Are the connectors secure? Go to step 3. Secure the connectors. 3 Check the Fuser harness continuity. 1. Remove the Fuser. 2. Disconnect J17 from the MCU Board and J47 from the LVPS. Is the harness damaged? NOTE P171 is attached to the frame. Repair the harness. Go to step 4. 4 Check the LVPS harness continuity. Disconnect J14 from the MCU Board and J501 from the LVPS. Is the harness damaged? Repair the harness. Go to step 5. 5 Replace the Fuser. Does the error persist? Replace the MCU Board. Comple

← Xem tất cả mã lỗi Xerox Phaser 6140

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie