Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 041-340 — Xerox Phaser 6140

Code: 041-340

Description: MCU NVRAM 041-340 Engine NVRAM is corrupte Note If this error occurs after MCU Board replacement, transfer NVRAM data from the original MCU Board to the replacement.
Causes: • Imaging Unit, PL4.1.21 • Toner Cartridge, PL5.2.21~24 • Toner CRUM Harness, PL5.1.26 • MCU Board, PL8.2.13 • EEPROM Board, PL8.2.16 • Imaging Unit Harness, PL9.1.11
Remedy: 1 Check these connections: • P/J311 Yellow Cartridge CRUM • P/J312 Magenta Cartridge CRUM • P/J313 Cyan Cartridge CRUM • P/J314 Black Cartridge CRUM • P/J31 and P/J42 on the MCU Board • P/J144 on the EEPROM Board • P/J422 on the Imaging Unit Are the connections secure? Go to step 2. Secure the connections. 2 Check Toner CRUM harness continuity. Disconnect: • J311 from the Yellow CRUM • J312 from the Magenta CRUM • J313 from the Cyan CRUM • J314 from the Black CRUM • J31 from the MCU Board Is the harness damaged? Repair the harness. Go to step 3. 3 Check the Imaging Unit harness for continuity. Disconnect: • J42 from the MCU Board • J144 from the EEPROM Board • P422 from the Imaging Unit Is the harness damaged? Repair the harness. Go to step 4. 4 Check for +3.3 V at the MCU Board connector P/J42. Is there +3.3 V between P42-3 <=>ground? Replace the EEPROM Board. Go to step 5. 5 Reseat the MCU Board connections. Does the error persist? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6140

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie