Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 042-325 — Xerox Phaser 6140

Code: 042-325

Description: Motor Error 042-325 The Main Drive Assembly has failed.
Causes: • Main Drive, PL7.1.2 • MCU Board, PL8.2.13 • Main Motor Harness, PL9.1.7
Remedy: 1 Check the Transfer Belt, Fuser, and Imaging Unit for correct installation. Are the parts correctly installed? Go to step 2. Correct any problems found. 2 Does the error persist when the power is turned On? Go to step 3. Complete. 3 Test the Main Drive: Engine Diag > Motor Test > Main Motor Full2. Does the motor rotate with the Front Cover closed? Replace the MCU Board. Go to step 4. 4 Check P/J21 and P/J211 between the MCU Board and Main Drive. Are the connectors secure? Go to step 5. Reconnect the connectors. 5 Check the Main Drive harness continuity. Disconnect P/J21 from the MCU Board and P/J211 from the Main Drive to check continuity. Is the harness damaged? Repair the harness. Go to step 6. 6 Check the Main Drive Assembly for correct installation. Is the Main Drive Assembly installed correctly? Go to step 7. Reseat the Main Drive Assembly. 7 Check for +24 V at J21 on the MCU Board. Is +24 V available at J21-2 and J21- 4 when the Interlock Switch is closed? Replace the Main Drive Assembly. Replace the MCU Board.

← Xem tất cả mã lỗi Xerox Phaser 6140

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie