Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 042-372, 042-373 — Xerox Phaser 6140

Code: 042-372, 042-373

Description: K Mode Sol Error 042-372, 042-373 The K (Color) Mode Solenoid did not actuate on time or gear C rotated twice.
Causes: • Feed Drive Assembly, PL7.1.4 • MCU Board, PL8.2.13 • REGCL(KSNR) Harness, PL9.1.9
Remedy: 1 Test the K Mode Solenoid: Engine Diag > Sensor Test > K Mode Solenoid. Does the solenoid operate? Go to step 2. Go to step 3. 2 Reseat the Feed Drive Assembly. Does the error persist? Go to step 6. Complete. 3 Check the solenoid connection. Is P/J24 on the MCU Board secure? Go to Step 4. Secure the connection. 4 Check for +24 V at J24 on the MCU Board. Is +24 V available at J24-1 <=> ground when the Interlock Switch is closed? Go to step 5. Replace the MCU Board. 5 Check the solenoid resistance. Is the resistance across J24-1 and J24-2 80 to 110 Ohms? Replace the MCU Board. Replace the Feed Drive Assembly. 6 Check connectors P/J26 on the MCU Board and P/J261 on the K Mode Sensor. Are the connectors secure? Go to step 7. Secure the connections. 7 Check the REGCL (KSNR) harness continuity. Disconnect P/J26 from the MCU Board and P/J261 from the solenoid. Is the harness damaged? Repair the harness. Go to step 8. 8 Check for +3.3 V at J26 of the MCU Board. Is there +3.3 V between ground <=> J26-1 on the MCU Board when the Interlock Switch is closed? Go to step 9. Replace the MCU Board. 9 Test the K Mode Sensor: Engine Diag > Sensor Test > K Mode Sensor. 1. Remove the Feed Drive Assembly leaving P/J261 and P/J24 connected. 2. Close the Front Cover. Does the display change when the sensor is blocked? Replace the MCU Board. Replace the Feed Drive Assembly.

← Xem tất cả mã lỗi Xerox Phaser 6140

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie