Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 061-370 — Xerox Phaser 6140

Code: 061-370

Description: Laser Error 061-370 An error was detected in the Laser Unit.
Causes: • Laser Unit, PL4.1.1 • ROS RE Harness, PL4.1.22 • ROS Video Harness, PL4.1.23 • MCU Board, PL8.2.13
Remedy: 1 Check the Laser Unit for correct installation. Is the Laser Unit correctly installed? Go to step 3. Reinstall the Laser Unit, then go to step 2. 2 Does the error still occur when the power is turned On? Go to step 3. Complete. 3 Check P/J40 and P/J41 on the MCU Board, and P/J411 and P/J412 on the Laser Unit. Are the connections secure? Go to step 5 Reconnect the connections. Go to step 4. 4 Does the error still occur when the power is turned On? Go to step 5. Complete. 5 Check the ROS RE harness continuity. Disconnect P/J40 on the MCU Board and P/J411 from the Laser Unit. Is the harness damaged? Repair the harness, then go to step 6. Go to step 7. 6 Does the error still occur when the power is turned On? Go to step 7. Complete. 7 Check the ROS Video harnesses for continuity. Disconnect P/J41 from the MCU Board and P/J412 from the Laser Unit. Is the harness damaged? Repair the harness, then go to step 6. Go to step 7. 8 Replace the Laser Unit. Does the error persist? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6140

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie