Code: 072-216
Description: Motor Error 072-216 An Optional Feeder Motor error occurred.
Causes: • Option Harness, PL3.1.20 • MCU Board, PL8.2.13 • Feeder Board, PL12.2.1 • Tray Motor Harness, PL12.2.2 • Tray Harness, PL12.3.23 • Option Feed Motor, PL12.2.98 • Feed Roller, PL12.4.4 • Separator Holder, PL12.5.5
Remedy: 1 Check the Optional Feeder installation. Is the Optional Feeder installed correctly? Go to step 2. Reseat the printer on the feeder. 2 Check the Feed and Separator Roller rotation. Do the rollers rotate smoothly? Go to step 3. Replace the rollers. 3 Check P/J422 on the Feeder Board and P/J211 on the Feed Motor. Are and connected secure? Go to step 4. Secure the connections. 4 Test the Option Feeder Motor: Engine Diag > Motor Test > Tray2 Feeder Motor. Does the Feed Motor rotate? Replace the MCU Board. Go to step 5. 5 Check the Tray Motor Harness continuity. Disconnect P/J422 on the Feeder Board and P/J211 on the Feed Motor. Is the harness damaged? Repair or replace the harness. Go to step 6. 6 Check power to the Feed Motor. Disconnect P/J422 on the Feeder Board. Is there +24V across ground <=> J422-6 when the Interlock Switch is closed? Replace the Option Feed Motor Kit. Go to step 7. 7 Check connections between the Feeder and MCU boards. Are P/J419, P/J273 and P/J27 secure Go to step 8. Secure the connections. 8 Check the Tray Harness continuity. Disconnect P/J419 from the Feeder Board and P/J273 from the Option Harness. Is the harness damaged? Repair or replace the harness. Go to step 9. 9 Check the Option Harness continuity. Disconnect P/J273 from the Option Harness P/J27 from the MCU Board. Is the harness damaged? Repair or replace the harness. Go to step 10. 10 Check power to the Feeder Board. Disconnect P/J27 on the MCU Board. Is there +24V across ground <=> J27-A5 and J27-A6 on the MCU Board when the Interlock Switch closed. Replace the Feeder Board. Replace the MCU Board.