Code: 077-215
Description: Duplexer Error 077-215 An Duplex Unit communications error occurred.
Causes: • Duplex Relay Harness, PL1.2.13 • Option Harness, PL3.1.20 • MCU Board, PL8.2.13 • Duplex Harness, PL11.1.14 • Duplex Board, PL11.1.16
Remedy: 1 Check the Duplex Unit installation. Is the Duplex Unit installed correctly? Go to step 2. Reseat the Duplex Unit. 2 Check the connections between the Duplex and MCU boards. Are P/J27, P/J271, P/J272 and P/J 601 connected secure? Go to step 3. Secure the connections. 3 Check the Duplex Harness continuity. Disconnect P/J601 from the Duplex Board and P/J272 from the Duplex Harness. Is the harness damaged? Repair or replace the harness. Go to step 4. 4 Check the Duplex Relay Harness continuity Disconnect P/J271 from the Duplex Relay Harness and P/J272 from the Duplex Harness. Is the harness damaged? Repair or replace the harness. Go to step 5. 5 Check the Option Harness continuity. Disconnect P/J272 from the Option Harness and P/J27 from the MCU Board. Is the harness damaged? Repair or replace the harness. Go to step 6. 6 Check power to the Duplex Board. Remove the Duplex Unit. Is there +3.3V across ground <=> J272-7 on the duplex connector when the Interlock Switch closed. Replace the Duplex Board. Replace the MCU Board.