Code: 010-317
Description: Insert Fuser The printer does not detect the presence of the Fuser. Warning The Fuser may be hot. Turn the printer power Off and allow at least 5 minutes for the Fuser to cool before removing the Fuser.
Causes: • Fuser, PL6.1.10 • Fuser Harness, PL6.1.11 • MCU Board, PL9.1.20
Remedy: 1 1. Check the Fuser for correct installation. 2. Is the Fuser correctly installed? Go to step 3. Reseat the Fuser. Go to step 2. 2 Does the error still occur? Go to step 3. Complete. 3 1. Check the wiring harness connectors P/ J17 and P/J171 between the MCU Board and the Fuser.* 2. Are the connectors securely connected? Go to step 4. Reconnect the connectors. Go to step 4. 4 Check the Fuser Harness for continuity. 1. Disconnect P/J17 from the MCU Board and P/J171 from the Fuser. 2. Check continuity between P/J17 <=> P/ J171. Go to step 5. Replace the Fuser Harness. 5 1. Replace the Fuser. 2. Does the error still occur? Replace the MCU Board. Complete.