Description: Fuser CRUM ID Error The Fuser CRUM ID error is detected. The Fuser CRUM ID read by the sensor is different from the one that was recorded. Warning The Fuser may be hot. Turn the printer power Off and allow at least 5 minutes for the Fuser to cool before removing the Fuser.
Causes: • Fuser, PL6.1.10 • MCU Board, PL9.1.20
Remedy: 1 1. Check the Fuser for correct installation. 2. Is the Fuser correctly installed? Go to step 3. Reseat the Fuser. Go to step 2. 2 Does the error still occur? Go to step 3. Complete. 3 1. Replace the Fuser. 2. Does the error still occur? Replace the MCU Board. Complete.