Code: 024-340
Description: MCU Firmware Error The MCU Board detects a firmware error. Code: xx • 01-02, 04-05, 0B-14: Unexpected Firmware Trapl • 03: IC2 Retry Error • 06: Not Used • 07: Master Fail 1 • 08: Master Fail 2 • 09: NVM Illegal Data • 0A: Over Dispense
Causes: • Transfer Unit, PL4.1.1 • HVPS, PL5.1.17 • Print Cartridge (C/Y/Y/K), PL5.1.18-21 • MCU Board, PL9.1.20
Remedy: 1 1. Check the error code detailed information (press the Up and Down arrow buttons simultaneously). 2. Does code “09” display on the Control Panel? Go to step 2. Go to step 5. 2 1. Check the following wiring harness connectors. • P/J16 and P/J28 on the MCU Board • P/J144 on the EEPROM Board 2. Are the connectors securely connected? Go to step 3. Reconnect the connectors. Go to step 2. 3 Does the error still occur? Go to step 4. Complete. 4 1. Replace the HVPS. 2. Does the error still occur? Replace the MCU Board. Complete. 5 1. Turn the printer power Off and On. 2. Does the error still occur? Go to step 6. Complete. 6 1. Check the printer firmware version. 2. Does the printer have the correct firmware version? Go to step 7. Upgrade the printer firmware. 7 1. Check the MCU Board for correct installation. Reseat the MCU Board. 2. Does the error still occur? Go to step 8. Complete. 8 Check external noise. 1. Are there other electrical appliances within 3 meters from the printer? 2. Turn the electrical appliances Off or relocate the printer at least 6 meters away from other electrical appliances. 3. Does the error still occur? Go to step 9. Complete. 9 1. Check the AC ground. 2. Is the AC power supply outlet wired and grounded appropriately? Go to step 10. Request the client to fix the AC power supply outlet. 10 1. Reseat the Print Cartridges. 2. Reseat the Transfer Unit. 3. Does the electrical noise still occur? Go to step 11. Complete. 11 1. Check the Print Cartridges for stains or debris. 2. Are the Print Cartridges dirty? Clean the Print Cartridges. Reseat the HVPS.