Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 024-911 — Xerox Phaser 6280

Code: 024-911

Description: Load Tray 3 (Paper Mismatch) The paper size mismatch is detected in Tray 3.
Causes: • MCU Board, PL9.1.20 • Tray 3 Size Switch, PL12.2.5 • Tray 3, PL12.4.1 • Tray 3 Retard Roll, PL12.5.17
Remedy: 1 1. Check the paper size. 2. Does the paper size meet the specifications? Go to step 2. Replace the paper with the correct specifications. 2 1. Check the paper size setting. 2. Does the paper match with the settings in the Control Panel? Go to step 4. Correct the paper settings in the Control Panel. Go to step 3. 3 Does the error still occur? Go to step 4. Complete. 4 1. Reseat the paper End Guide. 2. Does the error still occur? Go to step 5. Complete. 5 1. Replace Tray 3. 2. Does the error still occur? Replace the MCU Board. Complete. 6 1. Perform the Tray 3 Paper Size test: Service Mode > Engine Diag > Sensor Test > Tray 3 Paper Size. 2. Does the Size Switch operate properly? Go to step 7. Replace the Tray 3 Size Switch. 7 1. Check the Rollers for operation. 2. Does the Rollers rotate smoothly? Replace the MCU Board. Replace the Tray 3 Retard Rollers.

← Xem tất cả mã lỗi Xerox Phaser 6280

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie