Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 024-946, 077-912 — Xerox Phaser 6280

Code: 024-946, 077-912

Description: Insert Tray 2 (Tray Missing) The Tray 2 Size Switch indicates that Tray 2 is not installed. • Chain Link 024-946: Tray Detached • Chain Link 077-912: Upper Cassette Detached
Causes: • Tray 2 Size Switch Assy., PL7.1.18 • MCU Board, PL9.1.20 • Right Side Harness, PL10.1.15
Remedy: 1 1. Check the tray for correct installation. 2. Is Tray 2 correctly installed? Go to step 3. Reseat Tray 2. Go to step 2. 2 Does the error still occur? Go to step 3. Complete. 3 1. Perform the Tray 2 Paper Size test: Service Mode > Engine Diag > Sensor Test > Tray2 Paper Size. 2. Does the switch operate properly? Complete. Go to step 4. 4 Check the Right Side Harness for continuity. 1. Disconnect P/J29 from the MCU Board and P/J291 from the Size Switch Assembly. 2. Check continuity between P/J29 <=> P/J291. Go to step 5. Replace the Right Side Harness. 5 1. Replace the Tray 2 Size Switch Assembly. 2. Does the error still occur? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6280

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie