Code: 024-947
Description: Insert Tray 3 (Tray 3 Missing) The Tray 3 Size Switch indicates that Tray 3 is not installed.
Causes: • MCU Board, PL9.1.20 • Optional Feeder, PL12.1.1 • Tray 3 Size Switch Assy., PL12.2.5 • C2 Chute Harness, PL12.2.7
Remedy: 1 1. Check the tray for correct installation. 2. Is Tray 3 correctly installed? Go to step 3. Reseat tray 3. Go to step 2. 2 Does the error still occur? Go to step 3. Complete. 3 1. Perform the Tray 3 Paper Size test: Service Mode > Engine Diag > Sensor Test > Tray3 Paper Size. 2. Does the Switch operate properly? Complete. Go to step 4. 4 Check the C2 Chute Harness for continuity. 1. Disconnect P/J421 from the Feeder Board and P/J4211 from the Optional Size Switch Assembly. 2. Check continuity between P/J421 <=> P/J4211. Go to step 5. Replace Optional Sheet Feeder. 2. Does the error still occur? Replace the MCU Board. Complete.