Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 024-963 — Xerox Phaser 6280

Code: 024-963

Description: Load Tray 1 (MPT) (No Suitable Paper) The type or size of paper mismatched or Tray 1 (MPT) is empty.
Causes: • Tray 1 (MPT) Actuator Assy., PL2.1.24 • Tray 1 No Paper Actuator, PL2.1.26 • Tray 1 No Paper Sensor, PL3.1.15 • MPT NPP Harness, PL3.1.17 • MCU Board, PL9.1.20 • Right Side Harness, PL10.1.15
Remedy: 1 1. Check the paper size. 2. Does the paper size meet specifications? Go to step 2. Replace the paper with the correct specifications. 2 1. Check the paper size setting. 2. Does the paper match with the settings in the Control Panel? Go to step 3. Correct the paper settings in the Control Panel. Go to step 3. 3 Check the paper type. • Paper in the tray • Paper type setting in the Control Panel • Paper type of the printing job Go to step 4. Correct the paper type setting in the Control Panel. 4 1. Check the Tray 1 (MPT) Actuator. 2. Does the Actuator operate smoothly? Go to step 5. Replace the Tray 1 (MPT) No Paper Actuator. 5 1. Perform the Tray 1 (MPT) No Paper test: Service Mode > Engine Diag > Sensor Test > MPT No Paper. 2. Does the number on the Control Panel increase by 1 when the Actuator is activated? Replace the MCU Board. Go to step 6. 6 1. Check the wiring harness connectors P/J28, P/J282, and P/ J2821 between the Tray 1 No Paper Sensor and the MCU Board. Go to step 7. Reconnect the connectors. Go to step 7. 7 Check the Right Side Harness for continuity. 1. Disconnect P/J28 from the MCU Board and P/J282 from the MPT NPP Harness. 2. Check continuity between P/J28 <=> P/J282. Go to step 8. Replace the Right Side Harness. 8 Check the Tray 1 (MPT) NPP Harness for continuity. 1. Disconnect P/J282 from the Right Side Harness and P/J2821 from the No Paper Sensor. 2. Check continuity between P/J282 <=> P/J2821. Go to step 9. Replace the MPT NPP Harness. 9 Check the Tray 1 No Paper signal. 1. Disconnect P/J28 from the MCU Board. 2. Is there +3.3 V across ground <=> J28-B11 pin? Go to step 10. Replace the MCU Board. 10 Check the Tray 1 No Paper Sensor for operation. 1. Measure the voltage across ground <=> J28-B13 pin. 2. Does the voltage change when the Tray 1 No Paper Sensor of the Tray 1 No Paper Sensor is activated? Replace the MCU Board. Replace the Tray 1 No Paper Sensor.

← Xem tất cả mã lỗi Xerox Phaser 6280

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie