Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 116-314 ... 116-343 — Xerox Phaser 6280

Code: 116-314 ... 116-343

Description: Controller System Error The printer controller has detected error. Note For Chain Link 116-324: This error has occurred due to an optional 256 MB memory card is installed. Data is corrupted due to that it was stored/ accessed at incorrect locations. • Chain Link 116-314: On Board Network MAC Address Checksum Error • Chain Link 116-315: ESS On Board RAM W/R Check Fail • Chain Link 116-317: ESS ROM Check (Main) Fail • Chain Link 116-323: ESS NVRAM1 W/R Check Fail • Chain Link 116-324: ESS Illegal Exception • Chain Link 116-326: ESS NVRAM2 W/R Check Fail • Chain Link 116-327: ESS Instruction Cache Error • Chain Link 116-328: ESS Data Cache Error • Chain Link 116-343: ASIC Error (ASIC Fail)
Causes: • Image Processor Board, PL9.1.27 • Memory Card, PL9.1.30
Remedy: 1 1. Print the Configuration page and check the total memory capacity. 2. Does the total memory capacity show 512 MB? Go to step 2. Go to step 3. 2 1. Check the memory card in the optional memory slot. 2. Is there a 256 MB memory card installed? Remove the optional 256 MB memory card. Go to step 3. 3 1. Check the Image Processor Board for correct installation. 2. Is the Image Processor Board correctly installed? Go to step 2. Reseat the Image Processor Board. 4 Does the error still occur? Replace the Image Processor Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6280

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie