Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11,034.66 — Xerox Phaser 8200

Code: 11,034.66

Display: 11,034.66 DMC_PROG_FAULT(34)
Description: Motion Control Done Timer Too Late. A motion control profile done event could not be programmed. It was too late for the software to program the done event for a motion profile handled by control store event hardware. This error indicates that DMC interrupts were disabled for a long period of time. Almost always, this happens when a non-engine region generates a CPU exception during printing. The operating system processes CPU exceptions with interrupts off and the processing takes a long length of time. The user should check the task name saved with this fault to identify the culprit.

← Xem tất cả mã lỗi Xerox Phaser 8200

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie