Description: Printhead NVRAM data was all 0s: has this printhead been through normalization? If so, check wiring to printhead. May also be related to ESD.
Description: This error occurs when a printer is in Energy Star mode and a door is opened. Instead of just waking the printer up, the firmware reports a fault. Sending a file to the printer or pressing one of the front panel buttons will wake the printer up normally. There is no sevice action to correct this programming bug. Cycle the power to restart the printer.
Description: There is a problem with the lower tray assembly or it’s installation. INSURE THE INK HAS SOLIDIFIED PRIOR TO THE REMOVAL OF THE PRINTER FROM THE LTA. Remove the printer and inspect the LTA connection. If there is any damage to the connector, replace the lower tray assembly or connector. If there is not any damage, remove and inspect the connnection to the printer. This connection is on the left side of the printer next to the left rear foot. it is mounted with two e-rings and plugs into the power control board.
Description: Verify process motor operation with the Process Motor diagnostic test. Also exercise processes run with the process motor; transfix, drum maintenance and head tilt. This can be caused by the power control board. The process motor may have more than one task initiated. Reset all solenoids and the pressure roller prior to cycling power.
Description: No transistions are observed for the compound gear sensor, when the compound gear should be turning. Verify that compound gear sensor is not physically broken and is plugged in to the left I/O board. Run diagnostics to verify operation or change the sensor.
Description: The Drum Maintenance home sensor did not actuate or change state as expected. Run diagnostics to verify clutch and sensor operation. Also verify that the shaft is properly assembled.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.