Code: 07-130
Description: Paper Jam in Tray 1 Fault A paper jam has occurred in Tray 1.
Remedy: Remove Tray 1 and ensure that guides are set correctly. The paper is loaded correctly in the tray. Y↓N→Align the paper in Tray 1 then reinsert the tray. Check the position of the jammed sheet. The lead edge reached the Retard Roll. (Figure 1.) Y↓N→Enter Diagnostics Mode. Select: [Machine Test, EDC Mode, DC330 Component Control, 102-Sensor, Feed Sens] to block and clear the Feed Sensor. The sensor is OK. Y↓N→Replace the Feed Sensor (PL-XX). In Diagnostics Mode, go to [101-Clutch, Tray 1 Pick up] to energize the clutch. The clutch engages. Y↓N→Replace the Tray 1 Pick up (Feed) Clutch (PL-XX). Perform SCP Final Actions. Remove any jammed paper. Check the following for wear or damage and replace as required: • Retard Roller (PL-XX) • Pick up (Feed) and Forward Roll Assembly (PL-XX) • Elevator Plate (PL-XX) • Elevator Plate Springs (PL-XX)